News -

Home / News (Page 5)

How to control the speed of plastic mold processing
04-09-2020
Why the process goal of processing speed is very important in injection molding, because it is not only related to the processing cycle of the part, but also determines the economic cost of processing. The EDM processing...
What is the development trend of plastic molds in China in recent years
28-08-2020
After the development in recent years, my country's plastic mold industry has shown the following new development trends in the development of plastic molds, structural adjustments, and corporate management: Among the fo...
What are the types of plastic molds
22-08-2020
According to the different molding methods, the types of plastic processing molds corresponding to different process requirements can be divided, mainly including injection molding molds, extrusion molding molds, blister...
What are plastic materials?
14-08-2020
1. The main component of plastic raw materials is a matrix of polymer compounds called resins. 2. Plastic raw material: It is made of high molecular synthetic resin (polymer) as the main component to infiltrate various a...
How to deal with warpage and deformation of plastic molds during injection molding?
07-08-2020
Warpage and deformation of plastic injection molded products is a very difficult problem. It should be dealt with mainly from the aspect of mold planning, while the adjustment effect of molding conditions is very limited...
How to determine the parting line in the mold manufacturing process?
31-07-2020
The parting line is also called the parting line, which mainly depends on the design requirements and appearance requirements of the product, but also considers whether the processing is feasible and the position of the ...

<<<...3 456 7...10...>>>