News -

Home / News (Page 6)

What are the technical applications of plastic molds
16-07-2020
1. Development The various things and products that we produce and use in our daily life range from the base of the machine tool, the shell of the fuselage, to the shell of a screw, button, and various household applianc...
What are the polishing methods for plastic molds
11-07-2020
Mechanical polishing Mechanical polishing is a polishing method that obtains a smooth surface by cutting and plastic deformation of the material surface to remove the polished convex parts. Generally, whetstone strips, w...
Why is it difficult to control the cost of plastic mold
03-07-2020
Plastic mold factories often have many uncontrollable factors in the production and processing, such as the delivery time of the mold, the quality of the mold, and the cost of the mold are difficult to control. 1. Lack o...
Different plastic molds have different functions
29-06-2020
1. Plastic injection (plastic) mold It is primarily a molding die that is most widely used in the production of thermoplastic parts. The processing equipment corresponding to the plastic injection mold is a plastic injec...
How to improve the stability of the mold
19-06-2020
In the production practice, once some molds are put into use on the production line, various problems often occur, and the production requirements or technical requirements of the product cannot be satisfied, resulting i...
Three principles of mold material selection
14-06-2020
The mold meets the requirements of working conditions 1. Wear resistance When the blank is plastic in the mold cavity, it flows and slides along the surface of the mold cavity, causing severe friction between the...

<<<...4 567 8...>>>