Industry News - News

Home / News / Industry News (Page 12)

Design of thread molds in plastic mold factory
01-11-2019
The thread of the injection molded part is divided into two types: internal thread and external thread. The thread shape of the threaded product is generally divided into standard thread, rectangular thread, trapezoidal ...
How to deal with warpage and deformation during plastic mold injection?
26-10-2019
The warpage and deformation of plastic mold injection products are very problematic. It should be handled mainly from the aspect of mold planning, and the adjustment effect of molding conditions is very limited. So, what...
How do plastic mold manufacturers handle white edges?
19-10-2019
The white edge is a special injection defect of modified polyethylene and plexiglass, and most of it appears on the edge of the part near the parting surface. The white edge is an aggregate composed of a plurality of str...
Plastic mold installation and adjustment specifications
12-10-2019
1. Mold pre-check: Once the plastic molds was installed on the mold, it should be inspected in order to find the quality problem in time, and the mold should be removed after the machine is installed. When the mold fixin...
The more advanced the production of plastic mold equipment
30-09-2019
The production of plastic molds does not seem to be particularly complicated, but in the production process, the equipment produced does play a very important role. The more advanced equipment is produced, the more capab...
Stamping die enters the golden stage of development
21-09-2019
China's current total production of stamping parts processing molds has been at the forefront of the world, and has gradually changed from a mold importing country to a mold exporting country. There are more than 30,000 ...

<<<...10 111213 14...>>>